EGIL Basic, w/o options w accessories
Differential Probe Differential Probe, 1 kV AC/DC, 1000:1 or 100:1, waveform (DC to 100 kHz) or RMS value (30 Hz to 10 kHz) output
Current clamp, AC / DC, 600A, DC-10kHz, Ø 33mm, PL14 connection 3 year warranty on the main unit
Current clamp, AC / DC, 100A, DC-10kHz, Ø 58mm, PL14 connection 3 year warranty on the main unit
Current clamp, AC / DC, 1000A, DC-20kHz, Ø 50mm, PL23 connection 3 year warranty on the main unit
Contact adapter 500 series, black
Connection Cord Connection cord, insulated BNC connectors at both ends, 1.6 m length, for the Memory HiCorder series, and similar products
configured as follows: 3 = 3 voltage / current modules 0 = reserved for future use P = Reserved for future use 2 = device with integrated STVI touchscreen display C = CE mark potential-free 1 = reserved for future use E = power cord for continental Europe 0 = without IEC61850 S = standard device 0 = with test cable Accessories included: - Mains cable, continental Europe with CEE 7/7 Schuko plug - Ethernet cable for interconnection with PC, 210 cm long (quantity 1 each) - Instruction manual CD
Calibration with 4 ... 20 mA or simulation with resistance 1channel, 2 calibration values PT100 / PT 1000 all standard values -200 ... 850 ° C NTC (3kOhm) -40 ... 150 ° C --------- recommended: electr. Calibration without PT100 sensor (-196 ° C / -80 ° C)
Bistable switch Switching voltage 4 ... 250 V AC 4 ... 30 V DC, switching current 1 mA ... 3 A VA clamp for pipe d25 ... d40 mm and cable ties made of PA6 30 ... 100 mm Article no. 585100
Battery Load Unit
Battery impedance meter up to 60V, 0.1 μOhm - 3000 ohm, Interfaces: RS232 and external I / O connections Scope of delivery: power cable, manual