Bypass Ventil Typ BBZS1, DN50, Gehäuse L, Gewinde, 1.4404, Druck 1-10Bar, Feder E 316, AISI316L - EPDM + CALIBRATION CERTIFICATE
Butterfly valves specified with actuator in the order sheet; It will be used in the SCADA system and will be purchased equipped with actuators suitable for the SCADA system. The torque values of the actuators should be selected considering the diameters and pressures of the valves. In the speed selection of the actuator, the appropriate speed that will open/close in the shortest possible time should be selected in accordance with the valve diameter, without creating a shock effect. Actuators to be used in all diameters will be of one brand. Electric actuators will have the capacity to be used in continuous or intermittent currents, including the motor and accessories, and will be manufactured in accordance with International standards. Actuators; It shall have the appropriate torque range required for the control of the valves under all conditions (including the effect of local forces and in case of re-commissioning after a long time). The protection class of the actuators will be at least IP67. Actuators shall have adjustable limit switches (2 pcs) for fully open - fully closed position and adjustable torque switches (2 pcs) to close the power circuit when there is an obstruction in the direction of rotation. Actuators shall be supplied fully protected against corrosion. Climate Conditions: Ambient temperature: ( -25 ) i ( + 40 )°C Relative Humidity: (50%) i (80%) DN150 PN16 electric actuator (butterfly valve compatible) piece 10 DN200 PN16 electric actuator (butterfly valve compatible) piece 4 DN250 PN25 electric actuator (butterfly valve compatible) piece4 DN300 PN25 electric actuator (butterfly valve compatible) piece 4
Aumatic type AM01.1 Control Voltage: 24v DC On-Off Limit Switch, Torque fault signal output Power: 380volt AC Time from full closed to full open # 65 sec Valve: SAMSON Globe Valve Characteristic: On and Off Valve # Connection: Flanged DN150 PN40 Steel Body Nominal Temperature: 315°C Fluid: steam Nominal Pressure: 40 bar Working Type: On #off steam removal valve
AS-i card with plastic holder PG11
Aseptic single seat valve with Vapor barrier type BBYP, housing 1-L, Welding end, DN 40, AISI316L, P.T.F.E., single acting NC
AKTUATOR MULTI-TURN 400V 0.12KW 2800RPM
Actuator 380V
ACTUATOR QUARTER TURN PNEUMATIC VANE
Actuator name plate SA 10.2-F10 Speed 63 rpm Permissible ambient temperature -40/+70°C Torque range in direction CLOSE & OPEN 40-120 Nm Type of lubricant F15 Motor name plate AD00071-2-0.70 Speed 2800 rpm Mains voltage 3~ 400V CoseØ 0-54 Power 0.70kW
ACTUATOR ELECTRIC 110V 1/5HP 60HZ 1PH 45-110TORQUE
ACTUATOR 1375NM7BAR 3294CM3-VOL DISPLACEMENT
ACTUATOR